Revive Inflatable Plunge with 0.8HP Chiller | Portable dual-temperature system 35°F–107°F

Summary

Portable inflatable plunge system with 0.8HP heating and cooling, ozone sanitation, and Wi-Fi control. Holds steady from 35°F to 107°F for cold recovery or warm relaxation in compact home or studio spaces.

Overview

The Revive Inflatable Plunge with 0.8HP Chiller gives you hot and cold immersion in a portable setup. Its drop-stitch insulated PVC walls inflate in minutes and form a stable structure for safe use. The dual-mode chiller manages heating and cooling through a Wi-Fi app. Dual filtration and ozone sanitation support clean water for repeated sessions, while the insulated cover helps retain temperature. The system suits home gyms and small wellness areas where space and setup time matter.

Installation Notes

• Place on a level, load-rated surface
  
• Use a protective mat under the tub
  
• Inflate until fully firm
  
• Fill with clean water
  
• Connect hoses between tub and chiller
  
• Plug into a 120V GFCI outlet
  
• Set temperature through the Wi-Fi app
  
• Wait for temperature to stabilize before entry

Care & Maintenance

• Check temperature with a thermometer
  
• Balance and test water chemistry
  
• Rinse or replace filters on schedule
  
• Inspect seams, valves, and hoses
  
• Keep covered when idle
  
• Drain, dry, and store in a shaded area

Safety Information

• For wellness use only
  
• Get medical advice if you have heart, blood pressure, respiratory, or metabolic conditions, cold sensitivity, pregnancy, or recent surgery
  
• Never use alone or under alcohol or medication
  
• Limit session length based on tolerance
  
• Exit at once if you feel dizzy, numb, or short of breath

• Temperature Range: 35°F–107°F
  
• Cooling/Heating Capacity: 0.8HP
  
• Construction: drop-stitch insulated PVC
  
• Filtration: cartridge and metal mesh pre-filter
  
• Sanitation: ozone generator
  
• Electrical: 120V GFCI outlet
  
• Setup Time: about 15 minutes
  
• Included: insulated cover, quick-connect hoses, app setup guide
  
• Use: home recovery, fitness studios, wellness spaces

Features

• Dual heating and cooling
  
• 0.8HP chiller
  
• UV-resistant PVC body
  
• Ozone and two-stage filtration
  
• Wi-Fi control
  
• Insulated cover

Benefits

• Support full-range recovery and relaxation
  
• Deliver steady temperature performance
  
• Keep water clean with low upkeep
  
• Fit in smaller indoor or outdoor spaces
  
• Let you manage temperature from your phone

Cold Therapy

• Beginners: 60–65°F for 30 seconds–2 minutes
  
• Intermediate: 50–60°F for 2–5 minutes
  
• Advanced with clearance: 40–50°F for up to 10 minutes
  
• Below 45°F: high risk; use only with supervision

Hot Therapy

• 95–100°F for extended comfort
  
• 100–104°F for 10–15 minutes
  
• 104–107°F for 5–10 minutes with hydration

Contrast Use Warning

• Avoid rapid shifts between 35°F and 107°F without medical clearance. If cleared, use moderate ranges and rest at least 10–15 minutes between sessions.

For wellness use only. Not intended to diagnose, treat, or prevent any condition. Follow all manufacturer installation, electrical, and safety instructions.