








Buenospa Alaska Pro Cold Plunge Tub – 36–104°F Hot/Cold Immersion, 120V Plug-and-Play
- Description
- Medical Disclaimer
Product description
Give your space a pro-grade hot/cold plunge with precise control. Alaska Pro runs from 36°F to 104°F for cold or warm immersion. The built-in cool/heat pump, LED lighting, and plug-and-play 120V setup suit homes and wellness studios. WPS frame, UV-proof cabinet, and polyfoam insulation hold temp and look clean. Ozmix ozone + mixer and Crystal Clean filtration help keep water clear.
Key features
• Set water from 36°F (2°C) to 104°F (40°C).
• Use 120V plug-and-play power; 12A draw.
• Enjoy LED interior and corner lights.
• Benefit from W-EC 0.25 kW circulation pump.
• Rely on 20CR3-SB cool/heat pump.
• Get Ozmix ozone + mixer water care.
• Filter with Crystal Clean + Superfine cartridge.
• Frame uses WPS with HorizontSide UV-proof panels.
Specifications
Dimensions: 87" L × 43" W × 30" H.
Water capacity: 140 gallons.
Empty weight: 441 lbs.
Power: 120V / 12A / 60Hz.
Circulation: W-EC 0.25 kW.
Sanitization: Ozmix (ozone + mixer).
Filtration: Crystal Clean, 1 Superfine cartridge.
Lighting: central and corner LEDs.
Headrest: 1 included.
Supplier part: WM00831.
Build
Frame: WPS, Ice White.
Cabinet: Gray, HorizontSide UV-proof finish.
Insulation: polyfoam with polyurethane reinforcement.
Drain valves: 1.
Warranty
Structure: 5 years. Shell: 3 years. Major components: 2 years. Plumbing: 2 years. Labor: 1 year. Extended coverage available. (Match your seller terms on page.)
Care and maintenance
Verify temp with a reliable thermometer before entry. Balance water per maker guide. Rinse or replace the Superfine filter on schedule. Inspect hoses, fittings, and lid latches before each session. Keep the cover on when idle for heat hold and safety.
Installation, operation, safety
Hire a licensed electrician. Use a dedicated 120V circuit with GFCI. Place on a level surface rated for filled weight (≈1,600+ lbs). Provide drainage and non-slip footing. Follow maker clearances. Check local permit rules.
Health and safety notice
This product supports general wellness. It is not a medical device and does not diagnose, treat, cure, or prevent disease. Consult your clinician first if you have heart issues, blood-pressure concerns, cold sensitivity, implants, are pregnant, or had recent surgery. Never use alone. Limit time, start conservatively, and exit if unwell.
⚕️ IMPORTANT MEDICAL DISCLAIMER The products sold by Strength & Recovery Solutions are intended for general wellness, fitness, and personal use only. None of our products are medical devices, and they are not intended to diagnose, treat, cure, or prevent any disease, medical condition, or injury. We do not make medical or health claims about any products we sell. Any information provided on this website is for general informational purposes only and does not constitute medical advice. Individual experiences and results vary significantly.
Mandatory Health Consultation: You must consult with a qualified healthcare professional before using any fitness equipment, saunas, cold plunge tubs, cryotherapy devices, red light therapy equipment, or other wellness products—especially if you have pre-existing medical conditions, cardiovascular concerns, are pregnant or nursing, or take medications.
Use at Your Own Risk: Users assume full responsibility for proper installation, use, and safety precautions. Follow all manufacturer instructions. We are not responsible for injuries, damages, or adverse effects resulting from use of our products.

Choose options









- Description
- Medical Disclaimer
Product description
Give your space a pro-grade hot/cold plunge with precise control. Alaska Pro runs from 36°F to 104°F for cold or warm immersion. The built-in cool/heat pump, LED lighting, and plug-and-play 120V setup suit homes and wellness studios. WPS frame, UV-proof cabinet, and polyfoam insulation hold temp and look clean. Ozmix ozone + mixer and Crystal Clean filtration help keep water clear.
Key features
• Set water from 36°F (2°C) to 104°F (40°C).
• Use 120V plug-and-play power; 12A draw.
• Enjoy LED interior and corner lights.
• Benefit from W-EC 0.25 kW circulation pump.
• Rely on 20CR3-SB cool/heat pump.
• Get Ozmix ozone + mixer water care.
• Filter with Crystal Clean + Superfine cartridge.
• Frame uses WPS with HorizontSide UV-proof panels.
Specifications
Dimensions: 87" L × 43" W × 30" H.
Water capacity: 140 gallons.
Empty weight: 441 lbs.
Power: 120V / 12A / 60Hz.
Circulation: W-EC 0.25 kW.
Sanitization: Ozmix (ozone + mixer).
Filtration: Crystal Clean, 1 Superfine cartridge.
Lighting: central and corner LEDs.
Headrest: 1 included.
Supplier part: WM00831.
Build
Frame: WPS, Ice White.
Cabinet: Gray, HorizontSide UV-proof finish.
Insulation: polyfoam with polyurethane reinforcement.
Drain valves: 1.
Warranty
Structure: 5 years. Shell: 3 years. Major components: 2 years. Plumbing: 2 years. Labor: 1 year. Extended coverage available. (Match your seller terms on page.)
Care and maintenance
Verify temp with a reliable thermometer before entry. Balance water per maker guide. Rinse or replace the Superfine filter on schedule. Inspect hoses, fittings, and lid latches before each session. Keep the cover on when idle for heat hold and safety.
Installation, operation, safety
Hire a licensed electrician. Use a dedicated 120V circuit with GFCI. Place on a level surface rated for filled weight (≈1,600+ lbs). Provide drainage and non-slip footing. Follow maker clearances. Check local permit rules.
Health and safety notice
This product supports general wellness. It is not a medical device and does not diagnose, treat, cure, or prevent disease. Consult your clinician first if you have heart issues, blood-pressure concerns, cold sensitivity, implants, are pregnant, or had recent surgery. Never use alone. Limit time, start conservatively, and exit if unwell.
⚕️ IMPORTANT MEDICAL DISCLAIMER The products sold by Strength & Recovery Solutions are intended for general wellness, fitness, and personal use only. None of our products are medical devices, and they are not intended to diagnose, treat, cure, or prevent any disease, medical condition, or injury. We do not make medical or health claims about any products we sell. Any information provided on this website is for general informational purposes only and does not constitute medical advice. Individual experiences and results vary significantly.
Mandatory Health Consultation: You must consult with a qualified healthcare professional before using any fitness equipment, saunas, cold plunge tubs, cryotherapy devices, red light therapy equipment, or other wellness products—especially if you have pre-existing medical conditions, cardiovascular concerns, are pregnant or nursing, or take medications.
Use at Your Own Risk: Users assume full responsibility for proper installation, use, and safety precautions. Follow all manufacturer instructions. We are not responsible for injuries, damages, or adverse effects resulting from use of our products.
"After 6 months with the XMARK Functional Trainer, I can confidently say it's the best investment I've made for my home gym. The cable system is incredibly smooth, and the weight stack provides consistent resistance throughout the full range of motion. Build quality is commercial-grade - feels like equipment you'd find in a premium gym." — Marcus T., Chicago, IL
"I was hesitant about the space it would take up, but the XMARK's compact design fits perfectly in my garage gym. The variety of exercises I can do is endless - from lat pulldowns to functional movements. Assembly was straightforward with clear instructions." — Lisa M., Portland, OR
I’ve had mine for almost a year and couldn’t be happier. It was nearly double the price when I bought it, and I’d still do it again. The tub gets cold fast, feels great, and I love that I can deflate and store it in winter. Support was quick and friendly when I called. Friends and family love using it too. Highly recommend!
--Max B.--

Recovery Solutions
Nationwide Shipping & Handling
Real-time tracking updates.
Exceptional Customer Support
We are available 7 days a week to answer your questions
Secure Payments & Financing Options
SSL-encrypted checkout with secure payment gateways.
Featured collection
⭐⭐⭐⭐⭐
"What truly set Strength & Recovery Solutions apart was the exceptional service I received before I even placed an order. I had a few questions about the equipment and was immediately met with prompt, professional, and knowledgeable support. They took the time to understand my needs and guide me to the right product — no pressure, just genuine care. It felt more like a personalized consultation than a typical sales exchange. A truly elevated experience from the very beginning."
— Paul A., Kansas City, MO
⭐⭐⭐⭐⭐
"From the moment I landed on the Strength & Recovery Solutions website, I knew I was in the right place. The site is beautifully designed, easy to navigate, and feels like a true high-end shopping experience. Every detail — from the product pages to the checkout — was seamless and refined. It’s rare to find a store that combines functionality with such an elevated aesthetic. Absolutely impressed."
— Denise B., Tampa, FL








































